Home
|
Calculation Guides
|
CETCO HDD Estimator
|
CETCO HDD Estimator
SUMMARY
| SODA ASH |
|
| 0.25 to 0.50 lbs per 100 gallons of freshwater |
| Total lbs needed: 0 to 0 |
| Total 50 lb bags needed 1 to 1 |
| HYDRAUL-EZ® |
|
| 5 to 10 lbs per 100 gallons of freshwater |
| Total lbs needed: 0 to 0 |
| Total 50 lb bags needed: 1 to 1 |
| CLAY CUTTER™ |
|
| 14.00 ozs per 100 gallons of drilling fluid |
| Total ozs needed: 0 |
| Total 5 gallon pails needed: 1 |
| DRILL-TERGE™ |
|
| 2.00 to 3.00 qts per 100 gallons of drilling fluid |
| Total qts needed: 0 to 0 |
| Total 5 gallon pails needed: 1 to 1 |
| Mixing Order For Drilling Fluid Products |
| 1. SODA ASH (add when filling water) |
| 2. HYDRAUL-EZ® |
| 3. CLAY CUTTER™ (after drilling fluid has completely yielded) |
| 4. DRILL-TERGE™ (after polymer has been fully blended into the system) |
Disclaimer: The above estimated calculations do not include loss of material to formation, washouts, improper mixing, etc. CETCO makes no warranty of any kind and accepts no responsibility for the results obtained through the application of this information.
|
|
|
CETCO Drilling Products
is a division of CETCO.
CETCO is a wholly owned subsidiary
of AMCOL International Corporation
|
|
MARKETS SERVED
Non-Oil & Gas Drilling
Environmental Drilling
Geotechnical Drilling
Geothermal Heat Loop Grouting
Horizontal Directional Drilling
Mining & Exploration
Monitoring Well Drilling
Slurry Solidification
Waterwell Abandonment
Waterwell Drilling
Waterwell Grouting
Waterwell Rehabilitation
|
|