Drilling Fluids Program
Project Name:
Date: 11/22/2008
Soil Conditions: Swelling Clay
Bore Length: 500 feet
Recycling Fluid: No
Pilot Hole Fluid Requirements
Gallons per linier foot required: 0.00
Total Volume Required for Pilot Hole: 0 gallons
Note: Multiply gallons per linier foot by length of drill stem to get pumping requirements per drill stem.
Divide pumping volume requirements per drill stem by the mud pumping rate to get pull-back time in minutes per drill stem.
Total Volume of Drilling Fluid Required: 0 gallons
Drilling Fluid Products Needed for Project
Soda Ash
0.25 to 0.50 lbs per 100 gallons of freshwater
Total lbs needed: 0 to 0
Total 50 lb bags needed 1 to 1
Hydraul-EZ®
5 to 10 lbs per 100 gallons of freshwater
Total lbs needed: 0 to 0
Total 50 lb bags needed: 1 to 1
Clay Cutter™
14.00 ozs per 100 gallons of drilling fluid
Total ozs needed: 0
Total 5 gallon pails needed: 1
Suggested Additive(s) for Difficult Formations
Drill-Terge™
2.00 to 3.00 qts per 100 gallons of drilling fluid
Total qts needed: 0 to 0
Total 5 gallon pails needed: 1 to 1
Mixing Order for Drilling Fluid Products
1. Soda Ash (add when filling water)
2. Hydraul-EZ®
3. Clay Cutter™ (after drilling fluid has completely yielded)
4. Drill-Terge™ (after polymer has been fully blended into the system)
