| PRODUCT |
DESCRIPTION |
|
ACCU-VIS® |
Highly concentrated liquid polymer designed for fast field mixing and drilling applications to increase viscosity and inhibit hydration of clay and shale. |
|
BMR™ |
Bentonite Mud Remover - Removes bentonite that has been introduced as a drilling fluid and has resulted in a tough layer of mud that is difficult to remove. Also removes naturally occurring clays that intrude into the gravel pack, and contains no phosphates. |
|
CETCO® COARSE CHIPS |
Bentonite chips used as an interface between gravel pack and grout column, to decommission geotechnical boreholes and abandoned wells. CETCO COARSE CHIPS are screened to 3/8” to 3/4” size. |
|
CETCO® COATED TABLETS |
Bentonite tablets covered with water-soluble coating that allows them to reach discrete depths within the annulus. Compressed into 1/4” and 3/8” diameters. |
|
CETCO® CRUMBLES |
Granular bentonite designed for a variety of sealing applications (i.e. sealing casings, controlling loss of circulation, etc.). 8-20 Mesh granular bentonite. |
|
CETCO® GRANULAR GROUT |
20% solids, polymer-free, single component bentonite grout that allows placement in a low viscosity state. |
|
CETCO® GROUT |
20% solids, polymer-free, single component bentonite grout that allows placement in a low viscosity state. |
|
CETCO® ONE GEOTHERMAL GROUT™
|
CETCO ONE GEOTHERMAL GROUT is a thermally conductive bentonite grout that does not require the addition
of silica sand or other thermally conductive materials for enhanced thermal conductivity. Mixed with water only this
pumpable grout achieves a 0.80 Btu/hr/ft/F (1.38 W/Mk) thermal conductivity.
|
|
CETCO® TABLETS |
Bentonite tablets used for sealing the annulus of waterwells and monitoring wells. Compressed into 1/4”, 3/8”, and 1/2” diameters. |
|
C/S GRANULAR™ |
Granular bentonite designed for a variety of sealing applications (i.e. sealing casings, controlling loss of circulation, etc.). 30-50 Mesh granular bentonite. |
|
DPA™ |
Mineral Scale Remover - Cleans casing, screens, gravel packs, and water-bearing formations of deposits consisting of mineral scale. Calcium carbonate, iron, and manganese are the most common. |
|
GEOTHERMAL GROUT™ |
A specially blended high solids bentonite that can be mixed with sand in a two-part thermally conductive grouting material. GEOTHERMAL GROUT can be mixed to meet a range of thermal conductivity from 0.40 to 1.00 Btu/hr/ft/F. |
|
HIGH TC GEOTHERMAL GROUT™ |
HIGH TC GEOTHERMAL GROUT is a specially blended high solids bentonite that can be mixed with sand in a two-part, thermally conductive grouting material to improve the performance of ground source heat loop applications. HIGH TC GEOTHERMAL GROUT is an easy pumping grout that has been carefully developed to efficiently suspend solids (silica sand) for enhanced thermal conductivity. HIGH TC GEOTHERMAL GROUT can be mixed to meet a range of thermal conductivity (TC) from 0.40 to 1.21 Btu/hr/ft/F.
|
|
HYDRAUL-EZ® |
Specially treated bentonite drilling fluid designed for directional drilling. Suspends cuttings and maintains borehole integrity. |
|
INSTA-VIS™ PLUS |
Liquid polymer designed to improve drilling efficiency in both horizontal and vertical drilled holes through its rapid field mixing, viscosity development, and clay and shale inhibition. |
|
LBA™ |
Liquid Chelating Agent - Safely cleans casings, screens, and all other components of the well that are affected by soil, debris, and related material. |
|
PUREGOLD® GEL |
Organic-free and untreated 90 bbl yield high quality bentonite drilling fluid for groundwater monitoring industry. |
|
PUREGOLD® GROUT |
30% solids, organic-free, single component bentonite grout engineered to form contaminant resistant seal without affecting groundwater chemistry. |
|
PUREGOLD® MEDIUM CHIPS |
Bentonite chips used as an interface between gravel pack and grout column, to decommission geotechnical boreholes and abandoned wells. PUREGOLD MEDIUM CHIPS are screened to 1/4” to 3/8” size. |
|
SUPER GEL-X® |
200 bbl yield bentonite drilling fluid for maximum viscosity. Controls filtration rate for borehole stabilization and prevention of fluid loss. |
|
SUPER THIN™ |
Highly concentrated additive engineered to reduce drilling fluid viscosity, assist in settling solids, or disperse a bentonite filter cake. Offers immediate thinning action and reduces gel strength. |
|
VERSAFOAM® PLUS |
Ultra high-yielding, biodegradable liquid foaming agent for fresh or saltwater air rotary drilling. |