Plaza Deck Waterproofing

Restoration of existing plaza decks has unique design, performance, and risk consideration.

Plaza deck restoration can cause huge disruptions and creates potentially hazardous conditions to the occupants of a building. In addition, the longer the structure remains exposed during restoration the more likely water damage can occur to the interior of the building. COREFLEX® has unique performance and installation characteristics that help reduce these problems. By utilizing proven waterproofing technology, COREFLEX can decrease exposure, demolition, waste and related hazards—saving time, cost and disruption.

Backed by the industry-leading quality assurance program.

Nothing threatens the structural integrity and interior environment of a building like water ingress. And the The HydroShield™ Quality Assurance Program is a proven systematic approach resulting in the most comprehensive water protection in the industry. Period. Read more.

DOWNLOAD BROCHURE REQUEST ASSISTANCE

AQUADRAIN 18H

A two-part prefabricated sheet drain consisting of a 3-dimensional polypropylene formed dimple core covered with a heavy 8-oz. nonwoven polypropylene filter fabric on one side. The formed dimple core provides compressive strength and collects water for flow to drainage discharge pipes.

AQUADRAIN 20H

A two part prefabricated sheet drain consisting of a 3-dimensional polypropylene formed dimple core covered with a woven polypropylene filter fabric bonded to one-side. The formed dimple core provides compressive strength and collects water for flow to drainage discharge pipes.

AKWASEAL® LV Polyurethane Grout

A versatile remedial waterproofing product that stops water infiltration into, or out of above and below grade concrete structures. Proven effective in concrete joints, cracks, and poorly consolidated areas in concrete walls, floors and ceilings.

AKWASTOP

A hydrophilic rubber waterstop, AKWASTOP swells up to 300% upon contact with water and provides a consistent seal along the entire installation. It prevents water infiltration through cast-in-place concrete construction joints subjected to continuous or intermittent hydrostatic pressure.

AKWASWELL

A polyurethane-based caulk grade swelling paste, AKWASWELL is used primarily to seal rough surfaces in concrete construction joints. Swelling up to 500% of its initial volume when hydrated by water, it creates a positive seal and stops the flow of water through the joint and is suitable for low to moderate hydostatic pressure conditions.

AQUADRAIN 15X

A two-part prefabricated sheet drain composite consisting of a 3-dimensional polypropylene formed dimple core covered with a non-woven polypropylene filter fabric on one side. The formed dimple core provides compressive strength and collects water for flow to drainage discharge pipes.

AQUADRAIN 15XP

A three-part prefabricated sheet drain composite consisting of a 3-dimensional polypropylene formed dimple core covered with a non-woven polypropylenefilter fabric bonded to one-side and a polymeric film bonded to the other. The formed-dimple core provides compressive strength and collects water for flow to drainage discharge pipes.

AQUADRAIN 30H

A two-part prefabricated sheet drain composite consisting of a 3-dimensional polypropylene formed dimple core covered with a woven polypropylene filter fabric bonded to oneside. The formed-dimple core provides compressive strength and collects water for flow to drainage discharge pipes.

AQUADRAIN G20

A two-part prefabricated drainage composite consists of a high strength HDPE geonet core with a non-woven polypropylene filter fabric bonded to both sides. AQUADRAIN G20 is designed for horizontal and vertical applications requiring very high compressive strength with low to moderate flow properties.

AQUADRAIN GS25

A three-part prefabricated drainage and protection composite consisting of a high strength HDPE geonet core with nonwoven polypropylene filter fabrics bonded to both sides. AQUADRAIN G25 is designed for horizontal and vertical applications requiring very high compressive strength properties with low to moderate flow properties.

BENTOGROUT®

A high-solids grout that expands to form a thick, low permeable layer across the exterior surface of the structure, filling voids in the adjacent soil and sealing small cracks in the concrete.

BENTOGROUT® Pump and Mixer

The CETCO Bentogrout Pump and Mixer equipment is designed specifically for Bentogrout. CETCO Bentogrout equipment is comprised of a progressive cavity pump with a vertical paddle and horizontal ribbon blender type mixer.

CETSEAL Sealant/Adhesive

A multi-purpose, single component polyether moisture cure sealant/adhesive. CETSEAL is a low VOC, 100% solids, non-shrinking product with excellent UV resistance. Available in 10.1 oz cartridges with 12 cartridges per case at 12 lbs (5.4 kg), or 20 oz foil packs with 12 per case at 20 lbs (9 kg).

COREFLEX® 60

COREFLEX Consists of a thermoplastic membrane integrally bonded to a self-healing Active Polymer Core (APC). This combination of passive and active barrier technologies, along with fully welded seams, ensures superior waterproofing protection.

CXJ-SERIES

Used to waterproof structural concrete expansion joints for positive-side below grade foundation walls and under structural slabs, CXJ-200 and CXJ-400 consists of an extruded, thermoplastic, dual gland expansion joint seals with integrated side flanges. Movement at the joint is accommodated by the geometric shape of the double-cell, center gland configuration with two material layers to form the system.

ENVIROSHEET

A self-adhering composite sheet waterproofing membrane, ENVIROSHEET consists of 56-mils of rubberized asphalt and a 4-mil cross-laminated, polyethylene carrier film. The two components are laminated together to produce an extremely tough waterproofing barrier.

HYDROFIX

A 100% Solids Fluid-Applied, HYDROFIX is a single component waterproofing system. Its fluid application allows it to be installed at difficult areas such as around multiple pipe penetrations and over irregular substrates and cures to form a seamless membrane that is positively bonded to the substrate.

LDC 60

A elastomeric waterproof membrane, LDC 60 cures to form a seamless barrier that forms tenacious bond to concrete to prevent lateral water migration. The inherent toughness and elasticity of LDC 60 enables it to bridge small structural or shrinkage cracks which may develop in the substrate.

REVOFIX

REVO-FIX is a profiled expanded metal mesh strip designed for mechanically fixing WATERSTOP-RX and WATERSTOP-XP to cast-in-place concrete surfaces. Revo-Fix can be used as an alternative method to CETSEAL. Available in two sizes.

STRATABOND 100 Reinforcement Fabric

A 1.5-oz/sq-yd high strength, spun bonded polyester fabric used as a reinforcing layer with STRATASEAL HR hot-applied rubberized asphalt membrane. Stratabond 100 maintains its physical properties when wet and dimensionally stable over varying humidity levels and exhibits high resistance to splitting and cracking from thermal shock.

STRATAPRIME SB

A solvent-based, low VOC bituminous roof primer for use with STRATASEAL HR. it is a spray applied primer that improves the bond of the rubberized asphalt membrane to the concrete substrate. as a solvent based primer, it provides faster drying time and ease of application and can be installed in low temperature conditions.

STRATASEAL HR®

A hot-applied rubberized asphalt membrane, STRATASEAL HR is ideal for protected roof and split-slab deck waterproofing applications. Its a 100% solids thermoplastic product that is flexible as well as self-sealing. STRATASEAL HR is ready for use and requires no set-up.

SWELLTITE®

A highly effective waterproofing membrane, SWELLTITE® consists of a sodium bentonite compound integrally bonded to a geomembrane liner. This composite combines the active waterproofing benefits of sodium bentonite with the strength and durability of a thick geomembrane liner.

ULTRASEAL®

Consisting of an advanced Active Polyer Core (APC), ULTRASEAL is engineered to provide high-performance waterproofing protection for foundation applications. ULTRASEAL is 10 times less permeable and more chemically resistant than traditional hydrophilic waterproofing membranes.

ULTRASEAL® XP

Featuring XP technology, the latest innovation in active waterproofing, ULTRASEAL XP provides exceptional performance in a wide range of ground contaminates. Proven effective in both hydrostatic and non-hydrostatic conditions, the self-sealing ability of ULTRASEAL XP seals minor cuts or damage to the membrane.

VOLTEX®

Voltex® is a proven waterproofing membrane ideal for vertical and horizontal foundation surfaces. Voltex incorporates the high-swelling and self-sealing properties of VOLCLAY® sodium bentonite to form a monolithic, low permeable membrane to protect the structure from water ingress.

VOLTEX® DS

A bentonite-geotextile waterproofing membrane with Integrated Polyethylene Liner, VOLTEX® DS is comprised of two high strength geotextiles. The two geotextiles are interlocked by a patented needle-punching process which assures a consistent application of material.

VOLTEX® DSCR

VOLTEX DSCR is a highly effective waterproofing composite of high strength geotextiles,1.10 pounds of contaminant resistant sodium bentonite per square foot, and a integrally bonded polyethylene liner. The high swelling, low permeable, contaminant resistant sodium bentonite is encapsulated between the two geotextiles.

WATERSTOP RX

An active, flexible strip concrete construction joint waterstop, WATERSTOP-RX provides a strong positive seal by expanding upon contact with water. Proven effective on projects worldwide for over 20 years, Waterstop-RX is designed for both continuous and intermittent hydrostatic conditions. WATERSTOP-RX is available in multiple configurations.

WATERSTOP XP

The next generation of waterstop that expands upon contact with water to form a positive seal to stop water ingress through cast-in-place concrete construction joints and around pipe penetrations. Through the use of the patented XP technology, WATERSTOP® XP is proven effective in a wide range of contaminated environments.

500 5th Avenue Seattle WA

Seattle, WA USA

Vapor intrusion has become a significant environmental issue for regulators, industry leaders, and concerned residents nationwide. The use of a spray-applied gas vapor barrier to protect against the threat of vapor intrusion has become a widely recognized application by numerous local and state regulatory and guidance groups.

Download Full Case Study

Mercy Hospital Plaza

St. Louis, MO, USA

To minimize building exposure, poor air quality, and odors, this occupied hospital utilized COREFLEX to waterproof the plaza deck prior to installing a GreenScapes vegetated roof system, hard-scape and water features.

Download Full Case Study

Piper Tech Parking Deck

Los Angeles, CA, USA

Download Full Case Study

Ronald McDonald House

Chicago, IL, USA

CETCO provided the complete watertight green roof assembly for the nation’s largest Ronald McDonald House. Protected by CETCO’s COREFLEX® waterproofing membrane, three GreenScapes™ assemblies—intensive, extensive, and vegetated trays—were utilized to meet a challenging landscape design.

Download Full Case Study

Rush University Hospital Atrium

Chicago, IL, USA

Rush University is one of the top-ranked nursing colleges in the US. Its hospital is comprised of 676 beds and boasts national rankings in 10 of 16 specialty areas in U.S. New & World Report’s 2011 “America’s Best Hospitals” issue.

Download Full Case Study

Sandpiper Run Plaza Restoration

Pawley's Island, SC, USA

This restoration application used an extensive GreenScapes™ system with COREFLEX® waterproofing technology to create an ocean side lawn space for condo occupants. When used in restoration applications, CoreFlex® minimizes demolition, reduces building exposure and limits building down time.

Download Full Case Study

Shady Hills Gymnasium and Parking Garage

Cambridge, MA, USA

The original spec called for ULTRASEAL below slab with a layer of VOLTEX DS installed over it to provide protection from subsequent concrete operations. However, once the dewatering of the site began, it became apparent that there would be significantly more water at a greater flow rate.

Download Full Case Study

Toronto Fire Services

Totonto, ON, Canada

Vapor intrusion has become a significant environmental issue for regulators, industry leaders, and concerned residents nationwide. The use of a spray-applied gas vapor barrier to protect against the threat of vapor intrusion has become a widely recognized application by numerous local and state regulatory and guidance groups.

Download Full Case Study

Wake Forest University Hosp. Plaza Deck Restoration

Winston-Salem, NC, USA

Restoration of the plaza deck was required for watertightness of the hospital space below and reopening of the emergency room entrance. COREFLEX was quickly installed over the leaking hot-applied rubber membrane to complete the project on time with minimal building exposure.

Download Full Case Study

Washington Univ. School of Medicine Plaza Deck Restoration

St. Louis, MO, USA

When it was decided that a courtyard would be implemented into the WUSM/BJC Medical complex, the design team understood that waterproofing and protecting the occupied space below during construction would be critical to the success of the project.

Download Full Case Study