Waterwell Drilling

CETCO® TABLETS create a chemically resilient, low-permeability seal

 

Our line of premium CETCO® Grouts are an ideally cost-effective, safe and simple way to ensure that the annular space between the borehole and casing are permanently grouted and eliminate the possibility of ground water contamination. Most of our water well drilling grouts are NSF/ANSI Standard 60: Drinking Water Treatment Chemicals -- Health Effects certified, which is the nationally recognized health effects standard for chemicals which are used to treat drinking water.

REQUEST ASSISTANCE

SLURRYBOND

SLURRYBOND is a powdered inorganic mineral formula used for the solidification of high solids drilling slurries. SLURRYBOND is made from non-biodegradable mineral.

ACCU-VIS®

ACCU-VIS is a liquid copolymer designed for fast field mixing, viscosity building, and clay/shale stabilization in aqueous drilling fluids. ACCU-VIS is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

ACCU-VIS® & BELLE CRUMBLES

ACCU-VIS & BELLE CRUMBLES blends a granular bentonite with a consistently controlling liquid polymer to form a slurry that provides an economical way to seal and grout boreholes, well casings, and earthen structures. Once set, the slurry forms a complete grout seal with low permeability.

BARITE

BARITE is a high-grade barium sulfate specially processed use as a drilling fluid weighting additive. BARITE meets the API Specification 13A, Section 2 requirement for a drilling fluid.

C/S GRANULAR & CETCO® CRUMBLES

C/S GRANULAR and CETCO CRUMBLES are granular bentonite products composed of polymer-free, dried bentonite in various mesh sizes. CETCO CRUMBLES are coarser in size than C/S GRANULAR. Both are certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

CETCO® COARSE CHIPS

CETCO COARSE CHIPS are natural sodium bentonite screened to 3/8 inch to 3/4 inch in size. PUREGOLD MEDIUM CHIPS are natural sodium bentonite screened to 1/4 inch to 3/8 inch in size. Both are certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

CETCO® COATED TABLETS

CETCO COATED TABLETS are coated using an aqueous carrier to apply the coating. These untreated organic tablets are compressed into 1/4” (0.64 cm) and 3/8” (0.95 cm) sizes. CETCO COATED TABLETS are certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

CETCO® DEFOAMER

CETCO DEFOAMER is a non-ionic silicone solution designed to reduce surface tension and break foam bubbles over a wide variety of conditions.

CETCO® GRANULAR GROUT

CETCO GRANULAR GROUT mixes into a smooth bentonite grout that has no lumps and pumps easily. CETCO GRANULAR GROUT is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

CETCO® GROUT

CETCO GROUT is a 20% solids, polymer-free, single-component, easy-to-use sodium bentonite grout available in powdered form. CETCO GROUT allows placement in a low viscosity state. CETCO GROUT is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

CETCO® JOINT COMPOUND

CETCO JOINT COMPOUND is a lead-free, premium grade tool joint and drill collar lubricant for heavy duty drilling. This special mixture of the finest blend of copper flakes with a superior base gives maximum protection under extreme temperature and adverse conditions.

CETCO® MX-80

CETCO MX-80 is a granular bentonite product composed of dried bentonite clay with a typical size range between 30 and 100 mesh.

CETCO® TABLETS

CETCO TABLETS are organic free, high-swelling pure sodium bentonite. CETCO TABLETS are compressed into 1/4 (0.63 cm), 3/8” (0.95 cm), and 1/2” (1.27 cm) diameters. CETCO TABLETS are certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

CLAY CUTTER DRY

CLAY CUTTER DRY is an easy-mixing, water-soluble, polymer effective in controlling swelling clays. Used in horizontal and vertical drilling applications. CLAY CUTTER DRY is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

DE-CHLOR

DE-CHLOR is a white granular crystal that neutralizes chlorine in municipal water. Chlorine in water supplies can destroy polymer drilling fluids.

DRILL-TERGE

DRILL-TERGE is a liquid solution of non-ionic surfactants formulated to increase wetting properties of drilling fluids. DRILL-TERGE coats the cuttings created in the drilling process and allows for easier lifting and removal. DRILL-TERGE also coats the drill pipe and drilling tools which prevents clays from sticking to the metal surfaces.

GEOTHERMAL GROUT

GEOTHERMAL GROUT is a specially blended high solids bentonite that can be mixed with sand in a two-part thermally conductive grouting material to improve the performance of ground source heat loop applications. GEOTHERMAL GROUT is an easy pumping grout that has been carefully developed to efficiently suspend solids (silica sand) for enhanced thermal conductivity. GEOTHERMAL GROUT can be mixed to meet a range of thermal conductivity (TC) from 0.40 to 1.00 Btu/hr/ft/F (0.68 to 1.69 W/mK). GEOTHERMAL GROUT is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

GROUNDING GROUT

GROUNDING GROUT is a high-solids, single-component bentonite grout. GROUNDING GROUT is specially formulated to provide a conductive seal around grounding rods. When used to seal drilled boreholes in which vertical grounding rods are placed, GROUNDING GROUT increases the grounding system’s conductivity by lowering the resistivity from 300 ohms/meter with normal soil to 0.76 ohms/meter. GROUNDING GROUT adheres to the entire surface of the grounding rod, providing the smallest surface area and, consequently, offering the greatest effective resistance area. This helps to stabilize the ground resistance despite seasonal changes in temperature and soil moisture content.

HIGH TC GEOTHERMAL GROUT

HIGH TC GEOTHERMAL GROUT is a specially blended high solids bentonite that can be mixed with sand in a two-part, thermally conductive grouting material to improve the performance of ground source heat loop applications. HIGH TC GEOTHERMAL GROUT is an easy pumping grout that has been carefully developed to efficiently suspend solids (silica sand) for enhanced thermal conductivity. HIGH TC GEOTHERMAL GROUT can be mixed to meet a range of thermal conductivity (TC) from 0.40 to 1.21 Btu/h/ft/F (0.68 – 2.05 W/mK). HIGH TC GEOTHERMAL GROUT is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

INSTA-CLEAR DRY

INSTA-CLEAR DRY is designed to lower pH, break emulsions, and remove high levels of suspended solids. INSTA-CLEAR DRY is a specially blended dry granular product designed for both polymer slurry and water filled boreholes.

INSTA-VIS DRY

INSTA-VIS DRY is an easy mixing, water soluble, high molecular weight anionic polymer. This granular polymer improves drilling efficiency in both horizontal and vertically drilled holes by controlling shales and clays, improving lubricity, and increasing viscosity.

INSTA-VIS PLUS

INSTA-VIS PLUS is a multi-functional liquid polymer designed to improve drilling efficiency in both horizontal and vertical drilled holes through its rapid field mixing, viscosity development, and clay and shale inhibition. INSTA-VIS PLUS is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

MAGMA FIBER

MAGMA FIBER is a specially formulated, extrusion spun mineral fiber. This coarse, long flexible fiber will give increased circulation by bridging and plugging off voids, fractures, and all types of permeable formations. MAGMA FIBER is compatible with all oil and water based muds and emulsion.

MARSH FUNNEL & CUP

Viscosity measurement tool

MUD & SLURRY TEST KIT

An essential kit containing everything you need.

MUD BALANCE

Mud weight measurement tool

MULTI-SEAL

MULTI-SEAL is a select blend of four types of materials normally used for lost circulation. A flake material (cellophane), a granular material (nut shells), fine fibrous material (ground paper), and coarse fibers (cedar fibers). MULTI-SEAL is blended in the proper ratio to produce the most effective seal. MULTI-SEAL contains no fermenting materials or materials that chemically change the rheological properties of the fluid, even polymer mud’s.

PUREGOLD® GEL

PUREGOLD GEL is a minimum 80 - 90 bbl yield, organic-free, untreated, high quality bentonite drilling fluid designed for the groundwater monitoring industry. It complies with API 13A Section 10, Specifications for Drilling Fluid Materials and is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

PUREGOLD® GROUT

PUREGOLD GROUT is an easy mixing, organic-free, high-solids bentonite grout engineered to form a contaminant resistant seal without affecting groundwater chemistry. PUREGOLD GROUT is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

PUREGOLD® LUBE

PUREGOLD LUBE is an environmentally safe premium grade lubricant, free of petroleum hydrocarbons and metals. PUREGOLD LUBE is a tool joint lubricant designed for use in environmental drilling.

PUREGOLD® MEDIUM CHIPS

CETCO COARSE CHIPS are natural sodium bentonite screened to 3/8 inch to 3/4 inch in size. PUREGOLD MEDIUM CHIPS are natural sodium bentonite screened to 1/4 inch to 3/8 inch in size. Both are certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

REL-PAC®

REL-PAC is a non-fermenting granular polymer designed for building a low solids drilling fluid with increased borehole stability. REL-PAC is a highly dispersible polymer, which prevents the formation of hard lumps or fish eyes, for maximum product efficiency.

SAND CONTENT KIT

Sand content measurement tool

SAND SEALANT/MULTI-SEAL

SAND SEALANT a specially blended dry powdered mineral and MULTI-SEAL a dry select blend of four types of materials a flake material, a granular material, a fine fibrous material, and coarse fibers used for fluid loss control. SAND SEALANT/MULTI-SEAL added to a hole filled with SHORE PAC slurry, reduces slurry seepage into saturated open porous permeable cobbles, sands, and gravels.

SODA ASH

SODA ASH is the common name for sodium carbonate, which separates calcium into sodium and carbonate ions in solution.

SODIUM BICARBONATE

SODIUM BICARBONATE , NaHCO3 is used to lower the pH of drilling slurry from a pH of 12-13 (alkaline) to a neutral pH range of 8-9. A white powder, SODIUM BICARBONATE is also added to a base drilling fluid as a pH neutralizing additive. A buffer, SODIUM BICARBONATE is added to acidic water to raise the pH to 8-9.

STONE STOP

STONE STOP granular sealant is composed of polymer-free, dried minerals in various mesh sizes. STONE STOP is coarser in size than SAND SEALANT/MULTI-SEAL and controls slurry loss in extreme conditions.

SUPER GEL-X®

SUPER GEL-X is an easy mixing, high viscosity 200 bbl yield freshwater drilling fluid produced from the highest grade Wyoming sodium bentonite. SUPER GEL-X is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

SUPER THIN

SUPER THIN is a highly concentrated additive engineered to reduce drilling fluid viscosity, assist in settling solids, and can be used to disperse the filter cake created by a bentonite drilling fluid with continued circulation through the borehole. SUPER THIN is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

VARIFLO® CG

VARIFLO CG is a powdered, high-viscosity blend of modified cellulose polymer formulated for easy and quick dispersion in drilling applications. VARIFLO CG bonds to soil particles providing support and builds a protective wall cake. Low fluid loss characteristics and high viscosity help maintain hydraulic head.

VARIFLO® QD

VARIFLO QD is a coarse granular, high-viscosity blend of guar gum formulated for easy and quick dispersion in drilling applications. Coarser granules prevent lumps or encapsulation. VARIFLO QD bonds to soil particles providing support and builds a protective wall cake. Low fluid loss characteristics and high viscosity help maintain hydraulic head.

VENTURI MIXING HOPPER

Dry powder mixing tool

VERSAFOAM® PLUS

VERSAFOAM PLUS is an ultra high-yielding, biodegradable, liquid foaming agent for use in fresh and saltwater air rotary drilling. VERSAFOAM PLUS is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

Case Studies

Technical Data Sheets

Bentonite Tablets: Breaking Through the Myths and Misunderstandings

Hoffman Estates, IL

Breaking the myths about structural integrity and placement for bentonite tablets.

Download Full Case Study